STIHL FS460C Professional, Heavy Duty Strimmer, Brush Cutter FS461 FS410 FS411

  

STIHL FS 460C-EM Professional, Heavy Duty Clearing saw, Strimmer, Brush CutterPetrol 2 Stroke 45.6cc 2.2kW 30hp M-Tronic Start easy and run good, very clean condition and good working order, ready for work Just been serviced. New spark plug, air filter and fuel filter Comes with brushcutter metal blade Manufacture year. STIHL FS 460C-M HEAVY DUTY WITH M-TRONIC Professional clearing saw for cutting large areas of grass and clearing scrub Comfortable to use, durable, robust and very powerful clearing saw with ErgoStart and simplified starting system. Powered by low emission, fuel-efficient STIHL 2-MIX engine.

The 4 point anti-vibration system reduces user fatigue. Ideal for contractors, landscapers, local authorities and demanding property owners with large areas to maintain.

Reduced-emission engine technology 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

Large fuel tank The transparent fuel tank with a volume of 0.75 l ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration) Air filter with long service life The easily accessible paper filter with a long service life means it can go for long intervals without changing.

(similar to illustration) Winter setting slide control It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing.

(similar to illustration) Manual fuel pump (Purger) A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations. STIHL ErgoStart (E) STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

Simplified starting system Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

Bike handle When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue. STIHL 4-point anti-vibration system In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide Technical data Capacity CC 45.6 Performance 2.2kw Power output kW/bhp2.2/3.0 Performance PS2.7CO² ­ g/kWh840 Weight kg 8.5.