STIHL FS460 C Professional, Heavy Duty Clearing saw, Strimmer, BrushCutter 45.6CC

  

STIHL FS460 C Professional, Heavy Duty Clearing saw, Strimmer, BrushCutter 45.6CC. Start easy and run good, very clean condition and good working order, ready for work. New spark plug, air filter, and fuel filter. The Strimmer is in used condition and has marks and scratches all around because of the used, but this does not affect the good working order. It's very easy to work with.

This is a top range professional Brush Cutter, and with a regular maintenance will help you a long period of time. Please check all the photos. What you see is what you will receive.

If you have any questions, please leave a message. Cash on collection, please, if you can collect in person or. The Stihl FS460C-EM Petrol Clearing Saw is STIHL's most advanced clearing saw ever. It features the'M-Tronic' fully electronic engine management system which adjusts ignition timing and fuel metering in all operating modes.

The ErgoStart and simplified starting, the low emission 2-MIX engine and a 4 point anti-vibration system makes the Stihl FS460C-EM petrol clearing saw the idea choice for all those with large areas of tough overgrown grass to clear and maintain. 2-stroke engine with stratified charge.

A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

The transparent fuel tank with a volume of 0.75 l ensures long working intervals with fewer fuel stops. The level is easily visible from the outside.

Easy to refuel through a large, easily accessible tank opening. Air filter with long service life.

The easily accessible paper filter with a long service life means it can go for long intervals without changing. It is quick and easy to switch the setting from winter to summer using the slide control.

Using the winter setting will prevent the air filter and carburettor from freezing. A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations. This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes.

It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start.

M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again. STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself. Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide.

Changing the tool is made particularly easy by locking the plug-in bolt in place. Easy, comfortable thumb-operated control means the operator's hand never leaves the handle. This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged.

The correct quantity of fuel is delivered to the carburettor depending on the quantity of air pas.