Hyundai 56cc Petrol Garden Multi Tool 5-in-1 Grass Trimmer Brushcutter HYMT5600X

  
The HYMT5600X runs all four jobs from one 56cc engine, plus an 80cm extension shaft for serious long reach on tall hedges and overhead branches. The Hyundai HYMT5600X is a 5-in-1 petrol garden multi tool that runs all four jobs from one 56cc engine, plus an extension shaft for serious long reach on tall hedges and overhead branches. The 56cc two-stroke engine produces 1.7kW - noticeably more than the 1.45kW you get from a typical 52cc petrol multi tool - and is built with a 250-hour design life, compared with around 80-120 hours for many standard DIY petrol garden machines. Easy recoil start with a long-lasting HD nylon cord, a quick-change split shaft and a double shoulder harness make it ready for larger gardens, overgrown areas and demanding seasonal work. Longer-Life Engine for Tougher Seasonal Work. The HYMT5600X engine is built for a 250-hour design life, compared with around 80-120 hours typical of many standard DIY petrol garden machines.

With 1.7kW from a 56cc two-stroke (vs 1.45kW for a typical 52cc), it has the torque to keep going through brambles, dense weeds, heavy hedge work and overhead pruning without feeling stressed. The higher mid-range torque and power output also let the engine run cooler than a typical 52cc unit under the same load, which protects internal components, extends the overall lifespan and improves fuel efficiency over a season of heavy use. The grass trimmer handles lawn edges and awkward corners.

The brushcutter tackles thick weeds and overgrown areas. The hedge trimmer shapes hedges and shrubs. The pole saw reaches branches up high, with the extension shaft adding extra reach when you need it.

All powered by the same 56cc engine - no second machine, no second fuel can, no second storage spot. The shaft splits in the middle so you can swap attachments without tools. Move from trimming edges to cutting hedges in under a minute. The connection locks securely, so there's no wobble in use. Easy Pull Start, Built to Last. Soft-start recoil with a long-lasting heavy-duty nylon pull cord. The soft-start mechanism reduces the effort needed to pull through engine compression, so cold starts are cleaner and kinder on shoulders. An automatic-reset ON/OFF switch springs back to "ready" after each shutdown, and a digital rev limiter protects the engine from overspeed damage when an attachment unloads mid-cut. No electric start cables, no batteries to charge - just pull and go. Lighter In Use Than You Might Think. The 12kg figure is the boxed kit weight - engine, every attachment, extension shaft, harness, tools, manual and packaging. In normal use you carry the engine unit plus one attachment, around 6kg, supported by the included double shoulder harness that spreads the load across your shoulders and back.

Unleaded petrol, mixed 40:1 with semi-synthetic 2-stroke oil. 3 years (home) / 1 year (commercial).