Stihl FS70C-E Straight Shaft Bike Handle Petrol Brushcutter + Wire Head & Blade

  

STIHL FS70 C-E Petrol Brushcutter 27.2cc Bike Handle. Extremely robust 0.9 kW petrol brushcutter with bike handle.

2-MIX engine consumes up to 20% less fuel and 70% less emissions compared to conventional two-stroke engines without 2-MIX technology. ErgoStart simplified starting procedure for increased comfort.

Optimised trimmer angle for working on large areas of tough grass. Comes complete with an autocut trimmer line head AND GSB230 Blade. 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle.

This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions. A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself. Simply set the choke, pump the fuel primer, pull the starter cord and away you go!

The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting. When used in conjunction with a harness, the bike handle enables a smooth mowing action.

The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue. Easy, comfortable thumb-operated control means the operator's hand never leaves the handle. AutoCut C 26-2 Mowing Head. 2.4mm / 2.7mm.

170cm Total Length (Excluding Cutting Head). Unleaded Petrol Oil Mix 50:1.

Multi Function Bike / Bull. NOISE LEVEL IN DB(A) / LWA.

94dB(A) with Line Head / Blade. 0.9kW / 1.2bhp. 7/5.5m/s² with Line Head & 6.6m/s² with Blade.